台灣|電子通訊|光電半導體|模具相關|薪資40000起|高薪工作,共2197筆
-
- 面議(經常性薪資達4萬元或以上)
- 3年工作經驗
公司名稱:工作地: 亞洲其它印度同致電子企業股份有限公司
工作內容:【自動化製程工程師】 ■ 生產線參數CPK數據彙整、追蹤 ■ 生產線SOP、PFMEA、CP文件撰寫、維護 & 培訓 ■ 生產線進行動作優化、提高生產效率及良率改善 ■ 產線產品不良分析、短/長期對策施做、跟進 ■ 客戶不良品分析、8D報告撰寫 & 改善對策跟進與落實 ■ 輔助設備工程師與設備商討論動作原理、驗證、測試…等項目 ■ 派駐印度廠 【Process Automation Engineer】 ■ Set process parameters, compile and review CPK data ■ Write production line SOP, PFMEA, control plan document ■ Deal with process abnormities ■ Analyze product defect loss, develop short/long term solutions ■ Write 8D reports & implement improvements ■ Support discussions between equipment engineers and vendors ■ Willing to work in India factory (Gurugram) -
- 面議(經常性薪資達4萬元或以上)
- 3年工作經驗
公司名稱:工作地: 亞洲其它印度同致電子企業股份有限公司
工作內容:【SMT&DIP設備維護工程師】 ■ 生產設備維護、保養、異常處理、維修及生產工具、ESD檢測 ■ 改善並降低設備故障工時、設備安全操作、操作基準之完善 ■ 設備表格填寫與維護(例如:點檢表、保養表、維修紀錄表、環安檢查表…等) ■ 生產線進行動作優化、降低機故頻率/時間、提高生產效率 & 良率改善 ■ 生產線周邊設備/儀器維護、保養 & 替換 ■ 生產線技轉及相關文件製作、維護 & 教育訓練 ■ 派駐印度廠,需能配合輪班 【SMT & DIP Equipment Engineer】 ■ Production equipment maintenance, repair, troubleshooting, ESD detection. ■ Reduce equipment failure hours, operate equipment safely, and improve operating standards ■ Fill in the equipment form ■ Improve performance & quality of production line ■ Transfer skills, create/update document, arrange training ■ Willing to work in India factory (Gurugram) & work shifts -
- 面議(經常性薪資達4萬元或以上)
- 2年工作經驗
公司名稱:工作地: 亞洲其它印度同致電子企業股份有限公司
工作內容:【SMT & DIP製程工程師】 ■ 負責SMT各生產機種制程規劃。 ■ 生產作業標準檔的建立與修訂。 ■ 主導課內生產異常的對策分析。 ■ 工廠佈置與工裝規劃。 ■ 課內生產機種工時的作成。 ■ 課內持續改善的主導推行。 ■ SMT SAP途程的建立。 ■ PFMEA、 SOP、機種工藝卡、生產樣件維護。 ■ 生產技術的持續改進與經驗資料的累積。 ■ 產品進入量產前的技術把關及資料驗收。 ■ 生產技術異常的處理與分析。 ■ 生產樣品的測試與製作。 ■ 推動持續改善在本部門的實施。 ■ 派駐印度廠 【SMT & DIP Process Engineer】 ■ Responsible for the process planning of various SMT production models. ■ Establishing and revising production operation standard documents. ■ Leading the analysis and development of countermeasures for production abnormalities within the department. ■ Planning factory layouts and tooling. ■ Creating production hours for models within the department. ■ Leading and promoting continuous improvement initiatives within the department. ■ Establishing SMT SAP routings. ■ PFMEA, SOP, process cards for product models, and maintenance of production samples. ■ Continuous improvement of production technology and accumulation of experience data. ■ Conducting technical reviews and data verification before products enter mass production. ■ Handling and analyzing production technical abnormalities. ■ Testing and manufacturing production samples. ■ Driving the implementation of continuous improvement initiatives within the department. ■ Willing to work in India factory (Gurugram) -
- 月薪40000~80000元
- 2年工作經驗
公司名稱: 同致電子企業股份有限公司工作地: 桃園市蘆竹區工作內容:1.負責生產設備維護、保養、異常處理、維修及生產工具、ESD檢測 2.負責推進設備機故工時降低改善、設備安全操作、操作基準之完善 3.設備表格填寫與維護(例如:點檢表、保養表、維修紀錄表、環安檢查表…等) 4.生產線進行動作優化、降低機故頻率/時間、提高生產效率 & 良率改善 5.生產線周邊設備/儀器維護、保養 & 替換 6.生產線技轉及相關文件製作、維護 & 教育訓練 7.職等職稱依學經歷及能力核給 -
- 面議(經常性薪資達4萬元或以上)
- 10年工作經驗
公司名稱: 聯華電子股份有限公司工作地: 新竹市東區工作內容:Be in charge of IP/Library outsourcing programs Real time IP profile management IP contract driver / spec review IP contract executor / vendor design review Vendor benchmarking -
- 面議(經常性薪資達4萬元或以上)
- 3年工作經驗
公司名稱: 聯華電子股份有限公司工作地: 台南市新市區工作內容:1. Work on 2.5D/3D advanced packaging platform technologies. 2. Develop differentiated 3D stacking service and customized 2.5D interposer solutions. 3. Collaborate with internal R&D, Fab and OSAT partners to drive Heterogeneous Integration. 4. New advanced packaging process verification and qualification. 5. Customer engagement and new product verification.