台灣100大｜外商公司轉職工作機會，轉職跳槽推薦工作，提供履歷健診等強化服務|1111轉職專區-第3頁

設備工程師 Field Service Engineer - 林口 (濕蝕刻 Clean、蝕刻 Etch)
企業名科林研發股份有限公司
工作地點桃園市龜山區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

Sales Manager - Hsinchu/Kaohsiung
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Job Duties and Responsibilities (Technical and Operational) 1. Responsible for HVM Fab sales activities including revenue commits and delivery, building customer trust and installed base management (escalation, contract performance, CoC and productivity). 2. Provide accurate sales forecasts and update regularly regarding to change of prior plan. Issue quotation, Configuration and NSR (Non-Standard Requirement) for proper configuration and system slotting 3. Developing and executing strategies and actions for account team key application defense and penetration. To gain market share, and profitability. 4. Understanding Internal & External customers‘ needs and to build a strategic & sustainable relationship with them. 5. Serve as the primary Lam person regarding TSMC product/Business details and explanation, handling appropriate paperwork pertaining to Sales and delivery, and final negotiations. 6. Regular collaboration/coordination with Account‘s Sales/Process/Service Team in order to review status and plans to ensure an organized and efficient approach to penetration and installed base success to ensure Customer Trust activities. 7. Coordinate specific installation and process acceptance schedules with CSOM for timely system acceptance and manufacturing readiness.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

Technical Instructor (ECP) - Hsinchu
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 • Conducts technical training courses for customers and/or employees in the use of complex situations for multiple products. • Interacts with customers and functional organizations to develop specifications for content of courses. • Prepares lesson plans from engineering documentation, field service requirements or software documentation. • Works with engineering, technical support and manufacturing to ensure that course material reflects current product features. • Instructs participants in both classroom lectures and laboratory sessions. • Follows up to determine applicability of course material.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

Taiwan Regional Logistics Manager - Hsinchu
企業名科林研發股份有限公司
工作地點新竹市東區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容【Mission】 Own the end‑to‑end regional logistics network for spares—covering materials flow, inventory integrity, import/export compliance, 3PL performance, and customer service levels—to minimize fab downtime and maximize on‑time delivery with cost discipline. 【Key Responsibilities】 • Ops/Inventory: plan/control flow & data; ensure critical parts; run multi site WH/resupply; escalation; align to build plans; own financials/budgets; drive 8D/5 Why/Fishbone. • Compliance: SOX/ISO, safety, environmental, quality; BCP readiness. • 3PL/Systems: 3PL governance; WMS/SAP integrity; improvements & deployments (ECC/S/4/EWM, WMS, TMS); QC KPIs/training • Local transportation:　Develop and execute transportation strategies aligned with company goals. • People: hire/develop/evaluate; high trust, data driven, customer first. • IE & Customer: value stream, time/motion, capacity/bottlenecks; data prioritized fixes; A3/Kaizen/RCCA; SOP/WMS/TMS/SAP updates; customer window; voice of the cusotmer→projects; change control.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

Order Fulfillment Specialist, Spares- Hsinchu
企業名科林研發股份有限公司
工作地點新竹市東區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Job Responsibilities: 1. Order processing: Process customer orders, ensuring accuracy and efficiency in order entry; Track and monitor order status, providing regular updates to customers. Sox control and compliance. 2. Customer interaction: Manage incoming calls from external customers and internal filed engineers in a professional and courteous manner; Act as the primary point of contact for customers seeking information about Spare Parts; Listen attentively to customer inquiries, concerns, and requests. 3. Issue Resolution: Assist customers in resolving issues, such as order discrepancies, product defects, by coordinating with relevant departments; Initiate returns or replacements as needed, ensuring customer satisfaction. 4. Streamline projects: collaborate with company G&O on the program management. 5. Cross functions operation: accept new assignments during CSBG sections of CS, Logistics and CSBG Admin , and own ability to handle the cross functions operation.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

GPS (Global Product Support Engineer) - Hsinchu (Clean)
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 What You‘ll Do: • Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam‘s complex electro-mechanical and electronic systems at customer sites. • Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions. • Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification. • Maintain records and reports to coordinate activities between Lam and the customer. • Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction. • Transparently discuss opportunities and challenges with customer to increase trust. • Update customer on status of Lam tools as needed.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

RPS (Regional Product Support Engineer) - Hsinchu GD5 (Clean)
企業名科林研發股份有限公司
工作地點新竹市東區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 The Group You‘ll Be A Part Of The Customer Support Business Group focuses on enabling our customers with premier customer support throughout their lifecycle with Lam. We drive performance, productivity, safety, and quality of customers installed base performance and deliver service and lifecycle solutions for their most critical equipment and processes. The Impact You‘ll Make As a Regional Product Support Engineer at Lam, you re the backbone of technical support for field engineers, technicians, and product support personnel in the region. Your expertise is crucial in diagnosing, troubleshooting, repairing, and debugging complex electro-mechanical equipment, computer systems, software, or networked and wireless systems. May be involved in customer installation and training. Reports design, reliability and maintenance problems or bugs to design engineering/software engineering. Provides support in the early design phase of a new product. What You‘ll Do • Develops customer confidence through credible recommendations and an understanding of the customer’s perspective to support sales, service and revenue. • Drives required actions at the customer site to resolve escalations and prevent repeat / preventable problems. • Participates in Lam‘s worldwide technical community and actively shares knowledge and takes a leadership position to enhance worldwide learning and its application. • Acts as technical mentor for field and account engineers and may design or conduct training sessions. • Provides serviceability / installation assessments on new products Who We‘re Looking For • Higher technical education in electrical / mechanical engineering or other field of study • Effective communication in inter-departmental and cross cultural team • Experience with Lam Spin Clean Systems (EOS, DV-P) preferred • Troubleshoot technical problems and coordinate multiple technical tasks. • Able to work in constrictive clean room environment, wearing appropriate personal protective safety equipment as required, and sit or stand for prolonged periods of time in a demanding environment with changing workloads.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

RPS (Regional Product Support Engineer) - Hsinchu GD5 (Etch)
企業名科林研發股份有限公司
工作地點新竹市東區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Responsibilities: Technical: • Communicates as a subject matter expert on high level technical issues and escalations while providing guidance and recommending solutions. • Provides technical support to field engineers, technicians, and product support personnel who are diagnosing, troubleshooting, repairing and debugging complex electro/mechanical equipment, computer systems, complex software, or networked and/or wireless systems. • Responds to situations where first-line product and escalates or finds solutions in malfunctioning equipment or software. • Reports design, reliability and maintenance problems or bugs to design engineering/software engineering. May be involved in customer installation and training. • Partners with the account team to present to customers the problem statement, identified root causes and getting buy-in on proposed solutions • Identifies and communicates opportunities for installed base performance improvements within a customer site/account through hands on and or installed based performance data collection/analysis • Drives required actions at the customer site to resolve escalations and prevent repeat problems • Liaises between Customers, Product Groups, Field Sales, Business Development and other organizations to ensure closure of product issues. May works closely with Account GM(s), CSOMs and other senior level engineers in Field, CSBG and GPG. • Participates in the review of procedures, processes and tool design impacting development activity. • Manages projects and provides reports to management to deliver the desired result. Conduct customer escalation meetings. • Present technical and marketing materials to a high standard. Leadership: • Participates in Lam‘s worldwide technical community and actively shares knowledge and takes a leadership position to enhance worldwide learning and its application. • Acts as technical mentor for field and account engineers and may design or conduct training sessions. Customer Relation: • Provides support to customer/users where the product is highly technical or sophisticated in nature. • Develops customer confidence through credible recommendations and an understanding of the customer’s perspective to support sales, service and revenue. • Support process projects and manage customer and product group to drive to closure.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

RPS (Regional Product Support Engineer) - Hsinchu (SIG/Bevel)
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Looking to hire an experienced hardware engineer who is familiar with the semiconductor equipment manufacturing industry and doesn‘t shy away from the challenges that come with it, along with supporting Lam‘ s top tier customers. In addition to being Safety First oriented, the prospective candidate should possess strong organizational skills, be a critical thinker, and able to comprehend electrical schematics and equipment drawings. They also need to be able to effectively communicate in English. Being knowledgeable and having previous experience supporting Lam‘s SIG (Prevos, Selis, Argos) and Bevel (Coronus) products is preferable. This person will need to manage their time, work collaboratively within cross-functional teams and multi-task, to resolve our internal and external customer issues as quickly as possible. This position is based in Hsinchu. Must be willing to relocate if they‘re not already in Hsinchu. Job Responsibilities • As a Regional Product Support Engineer at Lam, you‘re the backbone of technical support for field engineers, technicians, and product support personnel in the region. • Your expertise is crucial in diagnosing, troubleshooting, repairing, and debugging complex electro-mechanical equipment, computer systems, software, or networked and wireless systems. • Your swift action in responding to situations is critical in resolving issues and ensuring satisfaction of Lam‘s valued customers. Other information: • Residence Location – Flexible • Work location – Hsinchu • Travel – PS team is centralized organization, so PS engineer isn‘t dedicated to a specific work location. (1) Need to take not only domestic but also international travel if needed (2) The frequency of travel depends on the demand from customers including Act team (3)＞30％ travel commitment

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

設備工程師 Field Service Engineer - 竹科 (乾蝕刻 Etch)
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容【本職缺接受科林研發官方網站投遞】請至科林研發官方網站投遞個人履歷表，此職缺履歷登錄網址: https://careers.lamresearch.com//job-invite/183934/ Technical 1 Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites. 2 Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions. 3 Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification. 4 Maintain records and reports to coordinate activities between Lam and the customer. 5 Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction. 6 Transparently discuss opportunities and challenges with customer to increase trust. 7 Update customer on status of Lam tools as needed. Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2. Shadow more experienced engineer at customer site

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

轉職找工作推薦

轉職工作職缺結果