台灣1000大｜外商公司轉職工作機會，轉職跳槽推薦工作，提供履歷健診等強化服務|1111轉職專區-第460頁

Global Installation Engineer 全球裝機工程師 - 高雄 (濕蝕刻 Clean、蝕刻 Etch、薄膜沉積 Thin Film)
企業名科林研發股份有限公司
工作地點高雄市左營區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1. High travel rate: 70~75％ of the time, including international travels. 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/13

【市場行銷部】PM(2)
企業名桂冠實業股份有限公司
工作地點台北市中正區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1.品類銷進存管理及完成銷售目標 30％ 2.產品價格結構、行銷費用控管，達成品類毛利/利潤目標 15％ 3.行銷策略規劃與執行 25％ 4.行銷溝通與經營，提升品牌好感度 10％ 5.新品/專案策略規劃與執行，以及主管交辦事項 20％

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/13

設備工程師 Field Service Engineer - 中科，需配合公司先在台南或高雄受訓，2027年派駐台中(濕蝕刻 Clean、蝕刻 Etch、薄膜沉積 Thin Film)
企業名科林研發股份有限公司
工作地點台中市西屯區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision. 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3. Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7. Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2. Shadow more experienced engineer at customer site.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/13

設備工程師 Field Service Engineer - 南科 (濕蝕刻 Clean、蝕刻 Etch、薄膜沉積 Thin Film)
企業名科林研發股份有限公司
工作地點台南市新市區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容【請同時至科林研發官方網站投遞履歷】此職缺履歷登錄網址: https://reurl.cc/vadDRy Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision 8. Perform other related duties as assigned by senior FSE / supervisor Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/13

設備工程師 Field Service Engineer - 高雄 (濕蝕刻 Clean、蝕刻 Etch、薄膜沉積 Thin Film)
企業名科林研發股份有限公司
工作地點高雄市路竹區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision 8. Perform other related duties as assigned by senior FSE / supervisor Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/13

Sales: Spare Parts and Business Development - 全台Lam辦公室皆可
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1. Develop Lam’s spare parts business strategy in collaboration with Business Development Managers, the tool sales team, and Product Groups. 2. Execute Lam’s business strategy and project plans to secure and grow spare parts market share across all Lam platforms. 3. Streamline spare part–related processes and ownership, including loaners, New Part Applications (NPA), Part Change Notifications (PCN), Product Lifecycle Management (PLC), part attribute definition, and part pricing parity. 4. Lead spare part cost reduction projects, including localization initiatives and alternative solution development in collaboration with Product Management and the Business Groups.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/13

設備工程師 Field Service Engineer - 林口 (Deposition)
企業名科林研發股份有限公司
工作地點桃園市龜山區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/13

國外業務(駐泰國) 面試心得
企業名萬泰科技股份有限公司
工作地點東南亞泰國
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1.當地日系客戶業務連絡/服務，東南亞日系客戶業務連絡/服務 2.當地業務擴展 3.須會日文(N2)

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/13

設備工程師 Field Service Engineer - 林口 (濕蝕刻 Clean、蝕刻 Etch)
企業名科林研發股份有限公司
工作地點桃園市龜山區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/13

Sales Manager - Hsinchu/Kaohsiung
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Job Duties and Responsibilities (Technical and Operational) 1. Responsible for HVM Fab sales activities including revenue commits and delivery, building customer trust and installed base management (escalation, contract performance, CoC and productivity). 2. Provide accurate sales forecasts and update regularly regarding to change of prior plan. Issue quotation, Configuration and NSR (Non-Standard Requirement) for proper configuration and system slotting 3. Developing and executing strategies and actions for account team key application defense and penetration. To gain market share, and profitability. 4. Understanding Internal & External customers‘ needs and to build a strategic & sustainable relationship with them. 5. Serve as the primary Lam person regarding TSMC product/Business details and explanation, handling appropriate paperwork pertaining to Sales and delivery, and final negotiations. 6. Regular collaboration/coordination with Account‘s Sales/Process/Service Team in order to review status and plans to ensure an organized and efficient approach to penetration and installed base success to ensure Customer Trust activities. 7. Coordinate specific installation and process acceptance schedules with CSOM for timely system acceptance and manufacturing readiness.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/13

轉職找工作推薦

轉職工作職缺結果