台灣轉職工作機會，轉職跳槽推薦工作，提供履歷健診等強化服務|1111轉職專區-第1984頁

工地安全衛生人員
企業名力福實業股份有限公司
工作地點彰化縣和美鎮
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1.工地安全衛生管理業務之推動與執行 2.現場安衛設備檢查、現場巡察安衛稽核輔導與檔案建置及改正作業 3.辦理安衛訓練及其他環安衛法規相關配合事項 4.各項安衛環保施工計畫製作以及提送 5.其他有關勞工安全衛生管理事項 6.須配合公司調配其他案場

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

12/22

Equipment Engineering_Penang, Malaysia
企業名頎邦科技股份有限公司
工作地點東南亞馬來西亞
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1. Electroplating/Etching Equipment Engineer (Including Laboratory) 【Day Shift】 • Develop and maintain electroplating/etching equipment • Troubleshoot and repair equipment issues • Analyze root causes and implement corrective actions 【Shift Work】 • Handle electroplating equipment abnormalities • Handle etching equipment abnormalities • Draft preliminary reports on equipment issues 2. Bumping Photo Equipment PM Engineer 【Day Shift】 • Perform routine equipment maintenance and testing • Manage and inventory machine parts 【Shift Work】 • Equipment maintenance and process conversion • Daily equipment inspections and parts inventory 3. Bumping Photo Equipment Engineer 【Day Shift】 • Draft WI/SOP/OCAP documents • Troubleshoot and optimize equipment issues • Evaluate new equipment • Improve equipment uptime and product rework rate • Execute cost-down projects 【Shift Work】 • Troubleshoot equipment breakdowns • Draft preliminary equipment failure reports • Perform routine equipment maintenance and testing 4. Packaging Equipment Engineer (Day Shift) • Assist department supervisor with staff scheduling and task assignments • Execute equipment improvement projects • Troubleshoot equipment issues • Evaluate new machines and processes • Revise WI documents and plan engineer training • Prepare DN & 8D reports and major equipment issue reports • Develop and execute maintenance plans • Manage spare parts and jigs • Perform equipment modifications • Investigate and resolve product anomalies • Perform tasks assigned by supervisors 5. Test Equipment PM Engineer (Shift Work) • Perform PM tasks and complete EPMS maintenance forms • Plan PM schedules (annual, semi-annual, quarterly, monthly) • Verify and manage spare/repaired parts • Arrange equipment calibration and record MSA data • Support other engineering-related activities 6. Probe Card (P/C) Engineer (Shift Work) • Integrate P/C information and place orders (new cards, repairs, delivery tracking) • Perform QC checks, labeling, storage, and handover following SOPs • Maintain PCM system data • Perform probe card adjustments and document maintenance • Conduct daily inspections and 6S housekeeping • Execute PM for probe cards and fill out reports • Handle outsourced repair and maintenance of probe cards with proper records • Support other engineering-related activities 7. Prober Engineer (Day Shift) • Coordinate with internal teams, vendors, and customers • Manage machine relocation and installation • Troubleshoot online issues and Prober PM failures • Create and manage setup files • Plan and execute improvement projects • Drive efficiency improvement (e.g., Prober downtime reduction) • Manage repair and verification of damaged components • Control inventory of Prober spare parts

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

12/22

Process Engineering_Penang, Malaysia
企業名頎邦科技股份有限公司
工作地點東南亞馬來西亞
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1. Sputtering / Photo Process Engineer 【Day Shift】 • Develop and implement new products and processes into mass production • Monitor and maintain process stability • Troubleshoot and improve process abnormalities • Improve product yield • Evaluate new materials and equipment • Plan experiments and analyze data • Collaborate with cross-functional project teams 【Shift Work】 • Handle abnormal products from production line • Develop exposure and measurement programs • Maintain and calibrate equipment • Support engineering experiments 2. Test Assistant Engineer • Support testing of engineering samples and experiments • Assist in cross-platform testing operations • Required to work on shifts 3. Discrepancy Notification (DN) Engineer • Assist in handling online lot disposition • Troubleshoot online lot issues to ensure smooth processing • Submit discrepancy reports to customers for low-yield WIP lots • Required to work on shifts 4. Test Product Engineer • Acquire comprehensive knowledge of products, equipment, a

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

12/22

Product Engineering_Penang, Malaysia
企業名頎邦科技股份有限公司
工作地點東南亞馬來西亞
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1. Product Engineer 【Day Shift】 • Proficient in operating and debugging inspection equipment in QC area • Understanding of basic Bumping/Backend processes; ability to identify defect types • ADC team must have precise defect classification capability • Handle abnormal lots and write SOPs; documentation owners must understand FMEA and Control Plan • Strong communication skills for cross-functional coordination; lead optimization/automation (CIM) projects 【Shift Work】 • Operate inspection equipment and maintain program functionality; learn setup processes • Confirm, investigate, and process defective materials • Support data collection and issue investigation for customer and engineering projects • Execute supervisor-assigned tasks and achieve department KPIs 2. BE Engineer • Coordinate with production control for pilot lots, returns, and engineering wafers final out • Confirm customer work orders • Prepare special process checklists for BE1 and BE2 • Maintain process station flows • Create and modify MES process parameters • Final out test area products • Drive improvement projects and system enhancements • On-call during holidays (for issue resolution and urgent final outs) 3. Bump Engineer • Support pilot lots, returns, and engineering wafer final outs with production control • Confirm customer work orders • Maintain product specifications, forms, and create EDC entries • Modify and maintain process station/machine group settings • Update process parameters and product specs • Configure backup masks and stencils • Manage mask hold/scrap and product data • Support manager-assigned tasks • On-call during holidays (for urgent issues or final outs) • Configure system Q-time and rework control cards • Set up mass production configurations for new products 4. FA Engineer • Analyze customer complaint issues • Analyze process improvement results • Analyze experimental data for new process introduction • Manage FA case scheduling • Operate FA lab equipment and perform basic troubleshooting • Arrange outsourced FA services and coordinate billing • Purchase and manage lab consumables (e.g., polishing materials, liquid nitrogen, sputter targets) • Maintain lab equipment and environment • Maintain related WI documents and forms • Assist with customer audits • Support manager-assigned tasks 5. Photomask Layout Engineer • Perform photomask design and outsourcing • Design and outsource backup/revised masks • Maintain system settings for masks and stencils • Create photomask process cards • Create and route process cards for stencils • Manage mask/stencil PR and procurement • Generate 2D map layouts • Process mask/stencil hold/scrap and initiate approval workflows • Draw POD diagrams 6. Packaging Design Engineer • Evaluate customer specifications (CRN/CDR), conduct discussions and compile data for customer confirmation • Communicate and resolve packaging-related issues • Handle system anomalies (contact and data confirmation) • Maintain packaging BOM and material info • Create and revise packaging WI documents and review related files • Maintain FMEA and Control Plan • Evaluate and test new packaging materials/second sources • Create VQA records for new packaging materials • Maintain packaging system and consolidate PK Verify results for various customers • Optimize packaging system workflows • Support customer audits related to packaging issues • Manage shipments without ERP records or with special labeling requirements • On-call during holidays for anomaly resolution

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

12/22

Production Engineering_Penang, Malaysia
企業名頎邦科技股份有限公司
工作地點東南亞馬來西亞
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1. Training Engineer • Execute KPIs assigned by supervisors and ensure timely, quality delivery • Possess technical and project execution capabilities • Demonstrate strong self-discipline and KPI self-management • Plan and coordinate automation projects • Conduct orientation and training sessions for new employees • Perform unit cost and material cost calculations • Plan and optimize factory layout • Manage selection, usage, and calibration of jigs and fixtures 2. Support Engineer • Translate high-level goals into departmental targets and manage associated risks • Lead or coordinate project teams with strong technical expertise • Plan and manage team personnel effectively • Apply industrial engineering principles to control material and labor costs • Handle production scheduling and task dispatching 3. Production Engineer • Execute KPIs assigned by supervisors and ensure timely, quality delivery • Demonstrate technical and project capabilities to meet job demands • Maintain self-discipline and personal KPI accountability • Conduct process analysis and implement continuous improvement • Handle production scheduling and resource dispatch • Write and present improvement and project reports • Plan and coordinate automation projects • Perform unit cost and material cost calculations

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

12/22

工研院感測系統中心_軟韌體工程師(創新/R300) 面試心得
企業名財團法人工業技術研究院
工作地點台南市安南區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容一、負責規劃、設計及測試感測器晶片的軟韌體，並整合感測器晶片至 STM32 等 MCU系統，以確保產品性能符合要求。二、撰寫 I²C / SPI 等感測器驅動程式並進行效能優化，根據測試結果，分析並解決軟韌體程式中的問題，進而提升系統穩定性及可靠度。三、將演算法嵌入MCU並執行感測資料收集與演算法驗證。四、進行資料傳輸(UART / USB)，並協助進行 MATLAB / Python 分析驗證。五、協助韌體穩定性調整、效能調校與版本管理。六、與硬體工程師交換意見，共同討論最佳解決方案，促進跨領域團隊合作。七、協助計畫爭取相關資料整理及編寫技術文件。

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

12/22

工研院產服中心_產業輔導專員_花蓮(R600) 面試心得
企業名財團法人工業技術研究院
工作地點花蓮縣花蓮市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容工研院基於維護原住民就業權益及善盡社會責任，特別規劃原住民定額僱用徵才專區，歡迎具原住民身分的您一起加入工研院大家庭！ (本專區為建立原住民人士履歷資料庫使用，非具原住民身分者，請至其他職務進行投遞應徵。) 1.開拓政府計畫與民營業務專案 2.主責專案管理之規劃及推動之行政管考作業

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

12/22

工研院產服中心_企業委任場域經理人(F200) 面試心得
企業名財團法人工業技術研究院
工作地點台北市內湖區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容我們正在尋求一位經驗豐富的場域經理人，加入我們在「企業場域部」的優秀團隊，應具備優異的領導力和專案管理能力，本職務主要負責推動新服務及解決方案在場域的應用及商業模式的擬定，以提升場域和服務品質。場域發展計畫，定期檢討營運績效，提升營運效能。(3) 成本控制與績效評估，監督營運收入及成本，優化資源配置二、招商與夥伴關係發展(1) 擬定招商策略，吸引目標企業與新創團隊進駐。(2) 與產業夥伴、政府單位及學術機構建立長期合作關係。(3) 發掘具潛力的公司進駐，打造場域創新創業共創生態圈。三、場域服務與加值發展(1) 為進駐廠商提供專業支援與加值服務，包含市場拓展、技術輔導、法規諮詢、辦理活動等。(2) 推動場域內的創新應用與跨領域合作專案，導入場域內新興科技應用的與實踐。(3) 建立並優化場域環境，以提升進駐企業的競爭優勢。四、場域商業模式與財務發展(1) 設計並推動具磁吸效應的商業模式，提升場域價值。(2) 透過數據分析與市場研究，評估場域的效益並提出優化建議。(3) 探索新興科技與產業結合的可能性，為進駐廠商規劃引進新事業發展機會。

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

12/22

工研院產服中心_中部地區服務專案主管_台中(R400) 面試心得
企業名財團法人工業技術研究院
工作地點台中市大雅區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容負責帶領團隊執行各類專案計畫，包含專案規劃與執行、客戶需求開發與管理、團隊合作以及績效評估與改善等工作。期望候選人具良好領導能力、優秀溝通技巧及專案管理經驗，以確保部門順利達成目標。一、專案規劃與執行：負責領導跨功能團隊，制定並執行各項專案計畫，確保專案按時、高質量完成。二、業務開發與管理：瞭解地區產業需求，分析政策與產業趨勢，提出具有可行性之經營方案，達成績效目標。三、團隊合作與領導力：激勵團隊成員發揮所長，建立和諧合作氛圍，有效分工與溝通，協助組織落實人才“選、訓、留、用”。四、績效評估與改善：定期檢討專案成效，評估專案對組織目標的貢獻，持續改進流程，促進專案團隊永續發展。五、創新與問題解決：具抗壓性、敏捷性，能精準處理與協調任務推動，符合專案管理標準原則。

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

12/22

工研院產服中心_ 專案推動管理師_內湖(S200) 面試心得
企業名財團法人工業技術研究院
工作地點台北市內湖區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1. 執行政府計畫、協助專案規劃/協調、進度追蹤、業務協調、報告撰寫與資源整合。 2. 串聯跨領域中小企業/新創與國內外產業合作，媒合商機、技術、資金等合適資源。 3. 進行民營計畫或專案的業務拓展與資源整合。

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

12/22

轉職找工作推薦

轉職工作職缺結果