台灣外商公司轉職工作機會，轉職跳槽推薦工作，提供履歷健診等強化服務|1111轉職專區-第2頁

設備工程師 Field Service Engineer - 南科 (濕蝕刻 Clean、蝕刻 Etch、薄膜沉積 Thin Film)
企業名科林研發股份有限公司
工作地點台南市新市區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容【請同時至科林研發官方網站投遞履歷】此職缺履歷登錄網址: https://reurl.cc/vadDRy Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision 8. Perform other related duties as assigned by senior FSE / supervisor Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

設備工程師 Field Service Engineer - 高雄 (濕蝕刻 Clean、蝕刻 Etch、薄膜沉積 Thin Film)
企業名科林研發股份有限公司
工作地點高雄市路竹區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision 8. Perform other related duties as assigned by senior FSE / supervisor Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

Sales: Spare Parts and Business Development - 全台Lam辦公室皆可
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 1. Develop Lam’s spare parts business strategy in collaboration with Business Development Managers, the tool sales team, and Product Groups. 2. Execute Lam’s business strategy and project plans to secure and grow spare parts market share across all Lam platforms. 3. Streamline spare part–related processes and ownership, including loaners, New Part Applications (NPA), Part Change Notifications (PCN), Product Lifecycle Management (PLC), part attribute definition, and part pricing parity. 4. Lead spare part cost reduction projects, including localization initiatives and alternative solution development in collaboration with Product Management and the Business Groups.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

設備工程師 Field Service Engineer - 林口 (Deposition)
企業名科林研發股份有限公司
工作地點桃園市龜山區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

設備工程師 Field Service Engineer - 林口 (濕蝕刻 Clean、蝕刻 Etch)
企業名科林研發股份有限公司
工作地點桃園市龜山區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

Sales Manager - Hsinchu/Kaohsiung
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Job Duties and Responsibilities (Technical and Operational) 1. Responsible for HVM Fab sales activities including revenue commits and delivery, building customer trust and installed base management (escalation, contract performance, CoC and productivity). 2. Provide accurate sales forecasts and update regularly regarding to change of prior plan. Issue quotation, Configuration and NSR (Non-Standard Requirement) for proper configuration and system slotting 3. Developing and executing strategies and actions for account team key application defense and penetration. To gain market share, and profitability. 4. Understanding Internal & External customers‘ needs and to build a strategic & sustainable relationship with them. 5. Serve as the primary Lam person regarding TSMC product/Business details and explanation, handling appropriate paperwork pertaining to Sales and delivery, and final negotiations. 6. Regular collaboration/coordination with Account‘s Sales/Process/Service Team in order to review status and plans to ensure an organized and efficient approach to penetration and installed base success to ensure Customer Trust activities. 7. Coordinate specific installation and process acceptance schedules with CSOM for timely system acceptance and manufacturing readiness.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

Technical Instructor (ECP) - Hsinchu
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 • Conducts technical training courses for customers and/or employees in the use of complex situations for multiple products. • Interacts with customers and functional organizations to develop specifications for content of courses. • Prepares lesson plans from engineering documentation, field service requirements or software documentation. • Works with engineering, technical support and manufacturing to ensure that course material reflects current product features. • Instructs participants in both classroom lectures and laboratory sessions. • Follows up to determine applicability of course material.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

Taiwan Regional Logistics Manager - Hsinchu
企業名科林研發股份有限公司
工作地點新竹市東區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容【Mission】 Own the end‑to‑end regional logistics network for spares—covering materials flow, inventory integrity, import/export compliance, 3PL performance, and customer service levels—to minimize fab downtime and maximize on‑time delivery with cost discipline. 【Key Responsibilities】 • Ops/Inventory: plan/control flow & data; ensure critical parts; run multi site WH/resupply; escalation; align to build plans; own financials/budgets; drive 8D/5 Why/Fishbone. • Compliance: SOX/ISO, safety, environmental, quality; BCP readiness. • 3PL/Systems: 3PL governance; WMS/SAP integrity; improvements & deployments (ECC/S/4/EWM, WMS, TMS); QC KPIs/training • Local transportation:　Develop and execute transportation strategies aligned with company goals. • People: hire/develop/evaluate; high trust, data driven, customer first. • IE & Customer: value stream, time/motion, capacity/bottlenecks; data prioritized fixes; A3/Kaizen/RCCA; SOP/WMS/TMS/SAP updates; customer window; voice of the cusotmer→projects; change control.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

Order Fulfillment Specialist, Spares- Hsinchu
企業名科林研發股份有限公司
工作地點新竹市東區
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 Job Responsibilities: 1. Order processing: Process customer orders, ensuring accuracy and efficiency in order entry; Track and monitor order status, providing regular updates to customers. Sox control and compliance. 2. Customer interaction: Manage incoming calls from external customers and internal filed engineers in a professional and courteous manner; Act as the primary point of contact for customers seeking information about Spare Parts; Listen attentively to customer inquiries, concerns, and requests. 3. Issue Resolution: Assist customers in resolving issues, such as order discrepancies, product defects, by coordinating with relevant departments; Initiate returns or replacements as needed, ensuring customer satisfaction. 4. Streamline projects: collaborate with company G&O on the program management. 5. Cross functions operation: accept new assignments during CSBG sections of CS, Logistics and CSBG Admin , and own ability to handle the cross functions operation.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

GPS (Global Product Support Engineer) - Hsinchu (Clean)
企業名科林研發股份有限公司
工作地點新竹市新竹市
薪資面議（經常性薪資達4萬元或以上）40000~40000元
工作內容 What You‘ll Do: • Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam‘s complex electro-mechanical and electronic systems at customer sites. • Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions. • Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification. • Maintain records and reports to coordinate activities between Lam and the customer. • Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction. • Transparently discuss opportunities and challenges with customer to increase trust. • Update customer on status of Lam tools as needed.

查看更多

應徵

工作適配度－%

登入後即可查看

根據履歷表的填寫狀況，智慧分析您與工作的適配程度。

3/12

轉職找工作推薦

轉職工作職缺結果